www.kersemi.com 1 power mosfet irfrc20, irfuc20, SIHFRC20, sihfuc20 features ? dynamic dv/dt rating ? repetitive avalanche rated ? surface mount (irfrc20/SIHFRC20) ? straight lead (irfuc20/sihfuc20) ? available in tape and reel ? fast switching ? ease of paralleling ? lead (pb)-free available description third generation power mosfet s from vishay provide the designer with the best combi nation of fast switching, ruggedized device design, low on-resistance and cost-effectiveness. the d pak is designed for surf ace mounting using vapor phase, infrared, or wave soldering techniques. the straight lead version (irfuc/sihfuc series) is for through-hole mounting applications. power dissipation levels up to 1.5 w are possible in typical surcace mount applications. note a. see device orientation. notes a. repetitive rating; pulse width limited by maximum junction temperature (see fig. 11). b. v dd = 50 v, starting t j = 25 c, l = 206 mh, r g = 25 , i as = 2.0 a (see fig. 12). c. i sd 2.0 a, di/dt 40 a/s, v dd v ds , t j 150 c. d. 1.6 mm from case. e. when mounted on 1" square pcb (fr-4 or g-10 material). product summary v ds (v) 600 r ds(on) ( )v gs = 10 v 4.4 q g (max.) (nc) 18 q gs (nc) 3.0 q gd (nc) 8.9 configuration single n -channel mosfet g d s dpak (to-252) ipak (to-251) a v aila b le rohs* compliant ordering information package dpak (to-252) dpak (to-252) d pak (to-252) dpak (to-252) ipak (to-251) lead (pb)-free irfrc20pbf irfrc20trlpbf a irfrc20trpbf a irfrc20trrpbf a irfuc20pbf SIHFRC20-e3 SIHFRC20tl-e3 a SIHFRC20t-e3 a SIHFRC20tr-e3 a sihfuc20-e3 snpb irfrc20 irfrc20trl a irfrc20tr a irfrc20trr a irfuc20 SIHFRC20 SIHFRC20tl a SIHFRC20t a SIHFRC20tr a sihfuc20 absolute maximum ratings t c = 25 c, unless otherwise noted parameter symbol limit unit drain-source voltage v ds 600 v gate-source voltage v gs 20 continuous drain current v gs at 10 v t c = 25 c i d 2.0 a t c = 100 c 1.3 pulsed drain current a i dm 8.0 linear derating factor 0.33 w/c linear derating factor (pcb mount) e 0.020 single pulse avalanche energy b e as 450 mj repetitive avalanche current a i ar 2.0 a repetitive avalanche energy a e ar 4.2 mj maximum power dissipation t c = 25 c p d 42 w maximum power dissipation (pcb mount) e t a = 25 c 2.5 peak diode recovery dv/dt c dv/dt 3.0 v/ns operating junction and storage temperature range t j , t stg - 55 to + 150 c soldering recommendations (p eak temperature) for 10 s 260 d
www.kersemi.com 2 irfrc20, irfuc20, SIHFRC20, sihfuc20 note a. when mounted on 1" square pcb (fr-4 or g-10 material). notes a. repetitive rating; pulse width limited by maximum junction temper ature (see fig. 11). b. pulse width 300 s; duty cycle 2 %. thermal resistance ratings parameter symbol min. typ. max. unit maximum junction-to-ambient r thja - - 110 c/w maximum junction-to-ambient (pcb mount) a r thja --50 maximum junction-to-case (drain) r thjc --3.0 specifications t j = 25 c, unless otherwise noted parameter symbol test conditions min. typ. max. unit static drain-source breakdown voltage v ds v gs = 0 v, i d = 250 a 600 - - v v ds temperature coefficient v ds /t j reference to 25 c, i d = 1 ma - 0.88 - v/c gate-source threshold voltage v gs(th) v ds = v gs , i d = 250 a 2.0 - 4.0 v gate-source leakage i gss v gs = 20 v - - 100 na zero gate voltage drain current i dss v ds = 600 v, v gs = 0 v - - 100 a v ds = 480 v, v gs = 0 v, t j = 125 c - - 500 drain-source on-state resistance r ds(on) v gs = 10 v i d = 1.2 a b --4.4 forward transconductance g fs v ds = 50 v, i d = 1.2 a 1.4 - - s dynamic input capacitance c iss v gs = 0 v, v ds = - 25 v, f = 1.0 mhz, see fig. 5 - 350 - pf output capacitance c oss -48- reverse transfer capacitance c rss -8.6- total gate charge q g v gs = 10 v i d = 2.0 a, v ds = 360 v, see fig. 6 and 13 b --18 nc gate-source charge q gs --3.0 gate-drain charge q gd --8.9 turn-on delay time t d(on) v dd = 300 v, i d = 2.0 a, r g = 18 , r d = 135 , see fig. 10 b -10- ns rise time t r -23- turn-off delay time t d(off) -30- fall time t f -25- internal drain inductance l d between lead, 6 mm (0.25") from package and center of die contact -4.5- nh internal source inductance l s -7.5- drain-source body diode characteristics continuous source-drain diode current i s mosfet symbol showing the integral reverse p - n junction diode --2.0 a pulsed diode forward current a i sm --8.0 body diode voltage v sd t j = 25 c, i s = 2.0 a, v gs = 0 v b --1.6v body diode reverse recovery time t rr t j = 25 c, i f = 2.0 a, di/dt = 100 a/s b - 290 580 ns body diode reverse recovery charge q rr - 0.67 1.3 c forward turn-on time t on intrinsic turn-on time is neglig ible (turn-on is dominated by l s and l d ) d s g s d g
www.kersemi.com 3 irfrc20, irfuc20, SIHFRC20, sihfuc20 typical characteristics 25 c, unless otherwise noted fig. 1 - typical output characteristics, t c = 25 c fig. 2 - typical output characteristics, t c = 150 c fig. 3 - typical transfer characteristics fig. 4 - normalized on-resistance vs. temperature
www.kersemi.com 4 irfrc20, irfuc20, SIHFRC20, sihfuc20 fig. 5 - typical capacitance vs. drain-to-source voltage fig. 6 - typical gate charge vs. gate-to-source voltage fig. 7 - typical source-drain diode forward voltage fig. 8 - maximum safe operating area
www.kersemi.com 5 irfrc20, irfuc20, SIHFRC20, sihfuc20 fig. 9 - maximum drain current vs. case temperature fig. 10a - switching time test circuit fig. 10b - switching time waveforms fig. 11 - maximum effective transient thermal impedance, junction-to-case p u lse w idth 1 s d u ty factor 0.1 % r d v gs r g d.u.t. 10 v + - v ds v dd v ds 90 % 10 % v gs t d(on) t r t d(off) t f
www.kersemi.com 6 irfrc20, irfuc20, SIHFRC20, sihfuc20 fig. 12a - unclamped inductive test circuit fig. 12b - unclamped inductive waveforms fig. 12c - maximum avalanche energy vs. drain current fig. 13a - basic gate charge waveform fig. 13b - gate charge test circuit r g i as 0.01 t p d.u.t l v ds + - v dd 10 v v ary t p to o b tain re qu ired i as i as v ds v dd v ds t p q gs q gd q g v g charge v gs d.u.t. 3 ma v gs v ds i g i d 0.3 f 0.2 f 50 k 12 v c u rrent reg u lator c u rrent sampling resistors same type as d.u.t. + -
www.kersemi.com 7 irfrc20, irfuc20, SIHFRC20, sihfuc20 fig. 14 - for n-channel p. w . period di/dt diode reco v ery d v /dt ripple 5 % body diode for w ard drop re-applied v oltage re v erse reco v ery c u rrent body diode for w ard c u rrent v gs = 10 v * v dd i sd dri v er gate dri v e d.u.t. i sd w a v eform d.u.t. v ds w a v eform ind u ctor c u rrent d = p. w . period + - + + + - - - * v gs = 5 v for logic le v el de v ices peak diode recovery dv/dt test circuit r g v dd ? d v /dt controlled b y r g ? dri v er same type as d.u.t. ? i sd controlled b y d u ty factor "d" ? d.u.t. - de v ice u nder test d.u.t circ u it layo u t considerations ? lo w stray ind u ctance ? gro u nd plane ? lo w leakage ind u ctance c u rrent transformer
|
